CS 240 Climbing scaffold
CS 240 is a crane-dependent climbing system that can be used both as a load-bearing scaffold or as a working and safety scaffold.
For versatile application: The CS 240 climbing scaffold with retractable formwork, available in two different versions: either as CS 240 L for use with wall formwork with through ties in concreting position or as CS 240 H for use on inclined walls up to 30°.
Videos & photos
By activating the video you accept the YouTube privacy policy.
To the privacy policy
Sibiu Bridge Romania: learn more about this colossal infrastructure project
Using CS 240 climbing formwork to raise floors.
Product advantages
Work productively
- High adaptability and load-carrying capacity of the climbing scaffold
- Usable either with frame panel or timber beam wall formwork
- Applicable for great heights of more than 100 m
- CS 240 H is usable on inclined walls up to 30°
- Climbing scaffold units can be pre-assembled according to project requirements and arrive on site ready to use
Work safely
- Guardrail posts ensure that all platforms are safe
- Quick and effective final assembly of the accessory parts on site
- Formwork can be rolled back from concrete by means of move-off unit
Application & use
Download the user guide here. Click on the name of a chapter to access it directly.
Overview of user guide
Technical data
CS 240 L Climbing scaffold | ||||||
Platform widths | Working platform 2.40 2.02 m | Pouring platform m | Trailing platform 0.82 m | |||||
Maximum formwork height | 5.40 m | |||||
Clearance from concrete | Up to 83 cm | |||||
Relevant standards | Load-bearing scaffold accoring to EN 12811 | Working and safety scaffolds according to EN 12811 part 1 | |||||
Influence width per CS brackets | With 4 m formwork height, up to 4.75 m (depending on wind load) | |||||
Handling | Crane | |||||
Formwork | MANTO | H 20 wall formwork | PLATINUM 100 | |||||
Application above ground | Up to 100 m and higher (accord. to statics) | |||||
CS 240 H Climbing scaffold | ||||||
Platform widths | Working platform = 2.60 m | Trailing platform = 2.02 m | Pouring platform = 1.30 m | |||||
Maximum formwork height | 5.40 m | |||||
Clearance from concrete | Up to 95 cm | |||||
Relevant standards | Load-bearing scaffolds according to EN 12811 | Working and safety scaffolds according to EN 12811 part 1 | |||||
Influence width per CS brackets | With 4 m formwork height, up to 4.75 m (depending on wind and concrete load) | |||||
Handling | Crane | |||||
Application above ground | Up to 100 m and higher (accord. to static calculation) | |||||
Max. formwork height for use as dam bracket | 3.90 m (accord. to static calculation) | |||||
Inclined walls | Up to ± 30° (accord. to static calculation) |
