MANTO®
MANTO is a very robust and easy to handle crane-set formwork system for large-area forming of walls.
A very versatile and heavy-duty system that is equal to very tough challenges. The aligning panel clamps ensure flush and force-fit connections and permit the transfer of large-area units by crane. With PEFC™-certified form liners.
Videos & photos
Product advantages
Work productively
- Broad range of panel sizes up to a height of 3.30 m
- Two stacked large panels form one unit with an astonishing 26 m² surface area
- All panels can be used both horizontally and vertically and can be combined as needed
- High flexural strength due to 14 cm steel profile, concrete pressure 80 kN/m²
- Fully galvanized steel frame and connection elements
- Strong connection with the aligning clamp: 40 m² can be moved in a single crane pick
- Easy and quick forming and stripping of shafts due to the MANTO shaft corner
Work safely
- Multi-purpose panels for easy forming of columns
- MANTO shaft corner for a system-compatible shaft formwork
Application & use
Download the user guide here. Click on the name of a chapter to access it directly.
Overview of user guide
Technical data
Panel widths | 30 | 45 | 60 | 75 | 90 | 105 | 120 | 240 cm |
Multi-purpose panel | 75 x 60 | 75 x 120 | 75 x 270 | 75 x 330 cm |
Profile thickness | 14 cm steel frame profile (closed) |
Form lining | Plywood (min. 280 g/m² coating) | ECOPLY full plastic composite sheet |
Lining thickness | Plywood = 18 mm | ECOPLY full plastic composite sheet = 19 mm |
Average weight | 55 to 75 kg/m² (including connection parts) |
Max. concrete pressure | Max. concrete pressure |
Corrosion protection | Max. concrete pressure |
Relevant standards | Complies with DIN 18216 | EN 1993 |
Standard connection | Aligning clamp (aligned and flush connection) |
Special connection | Adjustable aligning clamp | Corner clamp |
Inner corners | 35/35 cm (with 2.50° play for easing) |
Hinged corners | From 60° to max. 175° angles |
Outer corners | Basic panel with outer corner clamps |
Assembly/stripping times | t = 0.20 – 0.40 h/m² |
Special features |
|
