H 20 floor tables
Based on the H 20 timber beam as both the primary and secondary beam, the H 20 floor tables arrive on site pre-assembled.
Buildings with intricate ground plans and different story heights are difficult to form. This is where our table forms are a recommendable solution with their high load-bearing ability.
Product advantages
Work productively
- Pre-assembled H 20 floor tables are delivered to job sites for immediate use
- Quick and easy assembly of steel props due to convenient wedge connections
- Ready-to-use units with pre-assembled folding heads
- Floor tables can form large-area slabs quickly and economically
- Together with the 21 mm thick plywood form lining, H 20 floor tables can form slabs up to a thickness of 45 cm
Work safely
- Provided with built-in table heads and hinged plate for easy fixing of steel props
- Hinged plates allow props to fold up for better maneuvering in case of parapets
- Using the H 20 crane hooks, the tables can be transferred safely with ease
- Compatibility with the PROTECTO edge protection system offers extra safety with guardrailing (multiple clamps, posts, etc.)
- Props are easily and safely installed by simply hammering in the steel wedges
Technical data
Material | H 20 timber beams | Double primary & single secondary beams |
Table sizes | 2.50 x 4.00 m (10.00 m²) | 2.50 x 5.00 (12.50 m²)Table height Approx. 50 cm (including table heads) |
Table height | Approx. 50 cm (including table heads) |
Form lining | Plywood | 21 mm thickness |
Table weight | 2.50 x 4.00 = 345 kg | 2.50 x 5.00 = 417 kg (without props) |
Max. slab thickness | Up to 45 cm (2.50 x 4.00) | Up to 35 cm (2.50 x 5.00) |
Usable props | EUROPLUS 20 kN | EUROPLUSnew 30 kN |
Connections of props | Using HT-table head |
Relevant standards | DIN 18202 (line 5, 6) |
Areas of application | Large-area slabs |
