All components of the load-bearing frame prop are robust and galvanized for a long service life. The load-bearing frame prop has a system dimension of 25 cm x 25 cm and can be loaded with up to 210 kN. A type approval for heights up to 16 m (without wind) is available.
Videos & photos
Product advantages
Work productively
- Very high load capacity up to 210 kN even with small base dimensions of only 25 x 25 cm
- Versatile configuration of the prop jack, selectively at the top and/or at the base of the loadbearing frame prop
- Continuously variable adjustment of the articulated prop jack as a result of the 30 cm high spindle range
- Various connection possibilities for wall struts, bracing, and walkway brackets
- Frame sections in different heights for versatile application
- Vertical and horizontal application possible
Work safely
- Safe use due to officially approved calculation for prop heights up to 14 m (with wind) and up to 16 m (without wind)
- Simple L-bolt and spigot connections enable simple on-site assembly
- Easy assembly due to the low weight of basic components and simple bolt connections
Technical data
Material | Steel |
Base dimensions | 25.00 x 25.00 cm (4 posts) |
Frame section lengths | 100 | 150 | 200 cm |
Head section lengths | 50 | 75 cm |
Spindle range | From 0 cm to 60 cm (using two prop jacks) |
Angular compensation | From 0° to 7° or 10° (depending on surface) |
Typical application heights | 1.90 m to 10.00 m |
Type approval | Heights up to 14 m (with wind) | 16 m (without wind) |
Connections | Using L-bolts and connecting spigots |
Component max. weight | Prop Jack-2 = 50.00 kg |
Relevant standards | Complies with EN 12812 |
Max. load capacity | 210 kN at approx. 4.00 m | 185 kN at approx. 7.20 m |
Corrosion protection | Hot-dip galvanization |
Suitable as | Single prop | Load tower | Braced series |
Accessory parts | M-walkway bracket and railing post | Wall strut |
