The no. 1 choice for forming curved walls. By using the integrated spindle system, the rugged, ready-to-use elements can be precisely adjusted to any desired radius upward of 2.75 m.
Videos & photos
Product advantages
Work productively
- Short forming times due to ready-to-use elements available in 2 different widths and 3 heights
- 30 m² transferable via crane with no additional bracing
- Low transport volumes and great stackability as a result of the minimum element thickness of only 21 cm
- Easy height extensions with the MANTO aligning panel clamp
- Inner and outer elements available in various heights
- Additional edge protection of the formwork facing with MANTO edge profiles on the outside
Work safely
- Millimeter-precise radius adjustment using turnbuckles and fine-tune alignment thanks to lever edge on profiles
- Height extensions can be made using the aligning panel clamp from MANTO
- The element connector is easy to use and allows timber adjustments of up to 15 cm
- Easy turnbuckle operation using an open-ended spanner or tie rod (< Ø18 mm)
Application & use
Download the user guide here. Click on the name of a chapter to access it directly.
Overview of user guide
Technical data
Element heights | 150 | 200 | 300 cm |
Element widths | 128 | 250 cm (outer elements) 123 | 240 cm (inner elements) |
Element thickness | 20.80 cm (plane position) |
Form lining | Plywood 14 mm |
Max. concrete pressure | Up to 60 kN/m² |
Radius range | 5.50 – 35.00 m (inside) |
Relevant standards | Complies with DIN 18216 | EN 1993 |
Element connection | Via element connector Infills up to 15 cm possible |
Height extension | Via MANTO aligning panel clamp |
Corrosion protection | Hot-dip galvanization of all steel profiles and parts |
Forming/stripping times | t = 0.30 – 0.60 h/m² |
Component max. weight | Outer element 300 x 250 = 367.00 kg |
Special features |
|
